홈 아이콘 HOME    제품소개    AZDEN

more information
4CH Portable Mixer

Technical Specs:
GENERAL
Frequency Response
Balanced and Unbalanced Output:
20 Hz - 30 kHz (± 1.5 dB)
 

Monitor Out: 30 Hz - 30 kHz (± 2 dB)
 

Signal-To-Noise
Balanced Output: -120 dBu
(A weighted, Input Equivalent Level)
 

T.H.D.
Balanced Output: <0.005% @ 1 kHz (@ LINE position +19 dBu output)
 

Phantom Power Voltage: 48V (± 4V)
 

POWER
Battery Requirement: 6 Alkaline “AA”
Battery Runtime: Approx. 10 hours (Meter Illum. & Phantom Power OFF)
External Power: 12VDC @ 200 mA (10.5-17VDC - Locking 4-Pin Hirose Connector)
Current Drain: 155 mA (Meter Illum. & Phantom Power OFF - @ 9V)
195 mA (Meter Illum. OFF/Phantom Power ON w/2-SGM-1000 - @ 9V)
 

DIMENSIONS
56H x 220W x 150.5D mm (without protrusions)
1.968H x 8.6614W x 5.9055D inches (without protrusions)
 

Weight: 1400 g (w/o batteries)
           49.3835 oz (w/o batteries)
 

INPUT
Balanced Input:
XLR 3-pin x 4 (CH1, 2, 3 and 4)
 

Level
Line Input - Standard : +4 dBu (electronically balanced)
              - Maximum: > +26 dBu
 

Mic (@ -30) - Standard: -30 dBu (electronically balanced)
                 - Maximum: +4 dBu
 

Mic (@ -50) - Standard:-50 dBu (electronically balanced)
                 - Maximum: -11 dBu
 

Impedance
Line: 20 k ohm
Mic: 2 k ohm
 

High Pass Filter (HPF):
100 Hz – 6 dB/oct
 

OUTPUT
Balanced Output: XLR 3-pin x 2 (Output L and R)
Unbalanced Output: 3.5 mm (1/8") Stereo mini-jack
Monitor Output: 6.5 mm (1/4") Stereo jack
 

Level
Balanced Output
Standard: +4 dBu (> 10 k ohm load)
              -2 dBu (600 ohm load)
Maximum: +20 dBu (>10 k ohm load)
              +13 dBu (600 ohm load)
 

Unbalanced Output
Standard:-36 dBu (> 10 k ohm load)
Maximum:-20 dBu (> 10 k ohm load)
 

Tone Generator: 1 kHz @ +4 dBu
 

Monitor Out - Max.: +1 dBu - 32 ohm load
(16-100 ohm load recommended)
 

Output Imped. - Balanced: 600 ohm
                   - Unbalanced: 120 ohm
 

Meters
Standard Level: 0 VU (+4 dBu)